Lets Ride!

© ZUM Balance Bike 2012

Home Shop Gallery Support Contact Dealer

Quick Tips for adjusting the seat on the Wooden CX Balance Bike

1.  Remove the back wheel completely.

2.  Loosen the two bolts that connect the back of the bike to the front

3.  Adjust seat to desired height

4.  Reinstall back wheel

5.  Tighten two bolts that connect the back of the bike to the front


Please note the following:

The blocks that go on either side of the seat are slightly more narrow on one side.  The narrow side of both blocks should face towards the front of the bike.

The front and back axle bolts are different sizes.  The longer bolt goes in the back.  The axle nuts are also different sizes.  The shorter nut goes in the back.


Step by Step Assembly Instructions


Click Here for  - Assembly Instructions


Step by Step Conversion Instructions


Click Here for - Conversion Steps

 - Method One - Removing Steering  Pin -


Click Here for - Conversion Steps

 - Method Two - Separating front and back of bike

Order Spare Parts